INTRODUCCIÓN CURSO DISEÑO Y ADMINISTRACIÓN DE REDES (MIKROTIK MTCNA)
The student must have a good understanding of TCP/IP and subnetting.
En este curso aprenderás de que es capaz un mikrotik. En este curso te enseñamos, por ejemplo a configurar servidores DHCP, Firewall, enrutamiento basico, configurar redes wifi.
CONTENIDOS
Módulo 1: Introduction
- About MikroTik
- What is RouterOS
- What is RouterBOARD
- First time accessing the router
- WinBox and MAC-WinBox
- WebFig and Quick Set
- Default configuration
- RouterOS command line interface (CLI)
- Null Modem cable
- SSH and Telnet
- New terminal in WinBox/WebFig
- RouterOS CLI principles
- <tab>, double <tab>, “?”, navigation
- Command history and its benefits
- Initial configuration (Internet access)
- WAN DHCP-client
- LAN IP address and default gateway
- Basic Firewall – NAT masquerade
- Upgrading RouterOS
- Package types
- Ways of upgrading
- RouterBOOT firmware upgrade
- Router identity
- Manage RouterOS logins
- Manage RouterOS services
- Managing configuration backups
- Saving and restoring the backup
- Difference between a backup and an export (.rsc) file
- Editing an export file
- Resetting a RouterOS device
- Reinstalling a RouterOS device (Netinstall)
- RouterOS license levels
- Sources of additional information
- wiki.mikrotik.com
- forum.mikrotik.com
- mum.mikrotik.com
- Distributor and consultant support
- support@mikrotik.com
- Module 1 laboratory
Módulo 2: DHCP
- DHCP server and client
- DHCP client
- DHCP server setup
- Leases management
- DHCP server network configuration
- Address Resolution Protocol (ARP)
- ARP modes
- RouterOS ARP table
- Module 2 laboratory
Módulo 2: Bridging
- Bridging overview
- Bridge concepts and settings
- Creating bridges
- Adding ports to bridges
- Bridge wireless networks
- Station bridge
- Module 3 laboratory
Módulo 4: Routing
- Routing overview
- Routing concepts
- Route flags
- Static routing
- Creating routes
- Setting default route
- Managing dynamic routes
- Implementing static routing in a simple network
- Module 4 laboratory
Módulo 5: Wireless
- 802.11a/b/g/n/ac Concepts
- Frequencies (bands, channels) data-rates / chains (tx power, rx sensitivity, country regulations)
- Setup a simple wireless link
- Access Point configuration
- Station configuration
- Wireless Security and Encryption
- Access List
- Connect List
- Default Authenticate
- Default Forward
- WPA-PSK, WPA2-PSK
- WPS accept, WPS client
- Monitoring Tools
- Snooper
- Registration table
- Module 5 laboratory
Módulo 6: Firewall
- Firewall principles
- Connection tracking and states
- Structure, chains and actions
- Firewall Filter in action
- Filter actions
- Protecting your router (input)
- Protection your customers (forward)
- Basic Address-List
- Source NAT
- Masquerade and src-nat action
- Destination NAT
- dst-nat and redirect actions
- FastTrack
- Module 6 laboratory
Módule 7: QoS
- Simple Queue
- Target
- Destinations
- Max-limit and limit-at
- Bursting
- One Simple queue for the whole network (PCQ)
- pcq-rate configuration
- pcq-limit configuration
- Module 7 laboratory
Módulo 8: Tunnels
- PPP settings
- PPP profile
- PPP secret
- PPP status
- IP pool
- Creating pool
- Managing ranges
- Assigning to a service
- Secure local network
- PPPoE service-name
- PPPoE client
- PPPoE server
- Point-to-point addresses
- Secure remote networks communication
- PPTP client and PPTP server (Quick Set)
- SSTP client
- Module 8 laboratory
Módulo 9: Misc
- RouterOS tools
- Netwatch
- Ping
- Traceroute
- Profiler (CPU load)
- Monitoring
- Interface traffic monitor
- Torch
- Graphs
- SNMP
- The Dude
- Contacting support@mikrotik.com
- supout.rif, autosupout.rif and viewer
- System logs, enabling debug logs
- Readable configuration (item comments and names)
- Network diagrams
- Module 9 laboratory
Examen MTCNA (MikroTik Certified Network Associate )
Laboratorio Final de Certificación